Filter
Top Products
English-62
LUBRICATION
12. Changing the Oil Filter
1. Drain the engine oil in accordance with the
work description under the heading Engine
Oil/Change Engine Oil.
2. Remove the oil fi lter. If necessary, use a fi lter
remover.
3. Wipe new, clean engine oil onto the seal for
the new fi lter.
4. Mount the fi lter by hand with + ¾ turn.
5. Run the engine warm, then check that there
are no leaks around the oil fi lter seal.
6. Check the oil level in the engine, top up
if necessary. The oil fi lter holds 0.2 qt.
(0.2 liters) of oil.
Changing the oil fi lter Kohler
8011-745