Filter
Top Products
CONTROLS
BLADE DRIVE:
Located to left of operator. .
To engage the mower blade, turn lever on
floor slowly to the "ON" position.
To disengage mower blade, turn lever to the
"OFF" position.
MOWER DECK CUT HEIGHT LIFT LEVER:
Located to left of operator. Controls
the cutting height. Seven positions of
adjustment.
Move lever in and forward
to lower. Move lever in and back to
raise.
NOTE:
Always use high position for
transport.
CIRCUIT BREAKER:
Located on control panel to operator's right.
Protection of the electrical system is by (1)
15 amp circuit breaker.
If circuit breaker trips, push button to reset. For
location see control panel layout on page 16.
If this condition repeats, consult dealer for
inspection and repair.
Page 13