Filter
Top Products
Page 30
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1. The "snap lock" oil drain valve is located on the left side of the
engine crankcase.
2. Place a suitable container under the drain valve. The fitting of a short
piece of hose to the valve will help direct the oil.
3. Push the valve body in and twist to clear the detent notch.
4. Pulling the valve body outward will start the flow of oil.
NOTE:
Refer to engine manufacturer's recommendations for frequency of oil changes.
CAUTION
HOT oil may cause burns. Allow engine to cool before draining oil.
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
-PROTECT YOUR ENVIRONMENT-
BRIGGS & STRATTON KOHLER