Dixon 18124-106 Lawn Mower User Manual


 
SPECIFICATIONS
17
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE
Additional information may be provided elsewhere in this manual.
KODIAK
®
and MOUNTAIN KODIAK
®
CHASSIS: 11 GA - rectangular tube
SEAT: Designed for operator comfort by use of high-density
closed cell foam padded back and arm rests, upholstered
with Cordura
TM
water-repellent fabric. Seat is adjustable
fore and aft. Mounted on operator suspension system.
MOWER DECK: Made of 11 GA fabricated welded construction with external
reinforcement ribs. Three blades combine for a 50” cut
width. Cut height approximately 1.5” to 5” via 12 position
lift handle.
BLADE DRIVE: Electric clutch
DRIVE SYSTEM: Each rear wheel is independently driven by a Parker 10cc
pump or 10cc pump with fan (Mountain Kodiak only) and
TE0230 wheel motor.
ENGINE: Each mower is powered with either a 19HP Kawasaki,
20HP Honda, 20HP Kohler, 21 HP Briggs & Stratton
Vanguard, or a 25HP Kohler (Mountain Kodiak only) twin
cylinder engine, overhead valve, air cooled, gasoline, full
pressure lubrication with oil filter.
STARTING SYSTEM: Electric by key switch operation with safety interlocks on
parking brake and blade drive clutch.
TIRES: Front 13 x 5 x 6 smooth tread (16-21 lbs)
Rear 20 X 10 X 10 Turf Master (8-14 lbs)
CAPACITIES: Fuel - 11 gallon (approximately)
Hydrostat Oil tank - 4 quart with in-line 25 micron filter
Engine - 2 qts. SAE 10W30 (with filter)
DIMENSIONS: Width 46” outside rear wheel measurement
(approximate) Height 46.5”
Length 75”
Weight 760 lbs.