Filter
Top Products
CONTROLS
20
BLADE DRIVE:
•Located on the operator’s left.
•To engage the mower blade, turn
lever on floor slowly to the ON
position.
•To disengage mower blade, turn the
lever to the OFF position.
THROTTLE CONTROL LEVER:
•Located on control panel to
operator’s right.
•Throttle control for engine speed.
•Choke for engine starting.
•Throttle control should be set to
MAXIMUM or wide open setting to
insure adequate cooling of the
engine and to maintain mower deck
blade speed while mowing.
MOWER DECK CUT HEIGHT
LIFT LEVER:
•Located to the left of the operator.
•Controls the cutting height.
•Seven positions of adjustment.
•Move lever in and forward to lower.
•Move lever in and back to raise.
NOTE: Always use high for transport.