Filter
Top Products
21
OPERATION INSTRUCTIONS
BLADE DRIVE SWITCH TEST (ELECTRIC CLUTCH):
1. With the electric blade drive switch turned
on and the parking brake in ON position,
engine should not turn over or attempt to
start when key switch is moved to the start
position.
2, In a safe area, away from bystandards, start
the engine, place throttle setting at maximum
or full. Engage the blade drive through the
electric clutch switch. Raise weight slightly
off of seat. ENGINE SHOULD STOP.
3. If any Safety Check fails, do not operate the
mower until the system has been checked
and repaired by an authorized Dixon ZTR
dealer.