Filter
Top Products
25
OPERATION INSTRUCTIONS
TO LIFT SEAT:
To lift the seat, move the control levers to the neutral
“OUT” position. Unhook the seat damper by rotating the
clip of the retaining pin off of the clevis end and remove
the retaining pin. Remove the clevis end of the seat
damper from the seat hold down bracket and replace
the pin and rotating pin clip to lock them in place.
Release the seat latch and rotate the counter-balanced
seat support frame upward and forward.
To return the seat to the operating position, push the
counter-balanced seat frame support rearward and
down until it rests firmly on the tractor frame. Reconnect
the seat damper by reversing the order of removal as
stated above.
SPRINGS:
Three seat springs are provided. The center spring may
be removed for a softer ride.