Filter
Top Products
25
OPERATION INSTRUCTIONS
TO LIFT SEAT:
To lift the seat, move the control levers to the neutral
“OUT” position. Unhook the seat damper by rotating
the clip of the retaining pin off of the clevis end and
remove the retaining pin. Remove the clevisend of
the seat damper from the seat hold down bracket
and replace the pin and rotating pin clip to lock them
in place. Release the seat latch and rotate the
counterbalanced seat support frame upward and
forward.
To return the seat to the operating position, push the
counterbalance seat frame support rearward and down
until it rests firmly on the tractor frame. Reconnect the
seat damper by reversing the order of removal as stated
above.
SPRINGS:
Three seat springs are provided. The center spring may be
removed for a softer ride.