Filter
Top Products
37
CARE AND MAINTENANCE
CHANGING THE ENGINE OIL:
1. The “Dapco” oil drain valve is located on the left side of the
engine crankcase.
2. Place a suitable container under the drain valve. The
fitting of a short piece of hose will help direct the oil.
3. To drain, turn hex head valve stem counter-clockwise
with 10mm wrench or socket. Open to full open
(approximately 7 turns).
4. After engine is drained, tighten hex stem.
NOTE: Refer to engine manufacturer’s recommendations for
frequency of oil changes.
Hex Head Valve Stem
OIL FILL:
1. Drain oil.
2. Clean any spilled oil from engine and chassis.
3. Refill engine with type, and quantity of oil recommended
by the engine manufacturer in engine literature.
PLEASE DISPOSE OF USED OILS AT PROPER COLLECTION CENTERS.
PROTECT YOUR ENVIRONMENT.
CAUTION
HOT oil may cause burns. Allow
engine to cool before draining oil.