14
SPECIFICATIONS
Model 2700
CHASSIS:
11 GA - rectangular tube, 7 GA reinforcement
SEAT:
Designed for operator comfort with padded back & arm
rests. Seat is adjustable fore & aft. Mounted on operator
suspension system.
MOWER DECK:
2 decks are available. Both decks are made of 10 GA
fabricated welded construction with 1/4 " reinforcement
plate. 3 blades combine for either a 60" or 72" cut width.
Deep deck with discharge tunnel. Cut height approximately 1.5"
to 6" via 10 position lift handle.
BLADE DRIVE:
"V" Belt with Electric clutch
DRIVE SYSTEM:
Each rear wheel is independently driven by a HydroGear
BDP-10A pump and White CE wheel motor.
ENGINE:
27HP Kawasaki Twin, Liquid Cooled
4-Cycle, V-
Configuration, Overhead Valve, Gasoline, Horizontal
Shaft, Aluminum Head and Crankcase with Cast Iron
Liners, Full Pressure Lubrication/Full Flow Filter, Electric
Fuel Pump, Fixed Jet Carburetor, Electronic Ignition, In-
Line Fuel Filter, Dual Element Air Cleaner.
STARTING SYSTEM:
Electric by key switch operation with safety interlocks on
parking brake, blade drive clutch and control levers.
TIRES:
Front 13-6.5x6
Rear 23-10.5x12
RECOMMENDED
Front 16-20 lbs.
TIRE PRESSURE:
Rear 8-14 lbs.
CAPACITIES:
Fuel - 11 gallons (approx)
Hydrostat oil system - 4 quart with in-line 40 micron filter
Hydrostat oil recommendation - SAE 20W50 motor oil
Engine - 2 quart. SAE 10W30 motor oil
DIMENSIONS:
Width 73.5"(60" Deck), 85.5"(72" Deck)
Height 54"
Length 87"
Weight 1020 lbs.(60" Deck), 1054 lbs.(72" Deck)
Additional information provided in service instructions under the individual component.
SPECIFICATIONS SUBJECT TO CHANGE WITHOUT NOTICE.