CONTENTS
SAFETY RULES .........................................................4
SERVICE ............................................................5
ASSEMBLY ................................................................6
OPERATION .............................................................10
TIPS FOR IMPROVED BAGGING ...................10
GENERAL RECOMMENDATIONS ..................10
STORAGE ........................................................11
UNPACKING INSTRUCTIONS
Remove all parts and packing materials from •
carton.
TOOLS REQUIRED
•
7
/16" Wrench or ratchet and socket
½" Wrench or ratchet and socket•
•
7
/8" Socket
Torque Wrench•
Phillips Head Screwdriver•
Hacksaw•
Pliers•
NOTE: When right hand (RH) and left hand (LH) are mentioned in this manual, it means when you are
seated on the mower in the operator’s position.
Upper Chute
Bag Dump Indicator
Blower Housing
Middle Chute
CONTAINER CONTENTS
Blower Assembly • Drive Pulley•
Belt Shield • Belt•
Mounting Brackets • Bag of Hardware•
Belt Cover
CAUTION
BEFORE ASSEMBLING GRASS
CATCHER TO MOWER:
Set parking brake.•
Place motion control levers •
in “NEUTRAL” position.
Turn ignition key “OFF” and •
remove key.
Make sure the blades and •
all moving parts have
completely stopped.
Disconnect spark plug and •
place wire where it cannot
come in contact with plug.