DigiPower ACD-100 Yard Vacuum User Manual


  Open as PDF
of 3
 
®
Item No. ACD-100
Universal AC Power Supply
For Use With Digital Cameras
Thank you for purchasing the newest addition to the DIGIPOWER line of Universal
Power Products. Now, you no longer need to purchase many adaptors for your different
products. This one simple Universal Adaptor is easy to use and specifically designed for use
with your Digital Camera. Unlike other AC Adaptors, the ACD-100 changes Voltage and
Amperage with each Voltage setting, making this a truly dedicated adaptor. It comes with
nine different Voltage settings and four pin connectors to fit almost any Digital Camera.
Please be sure to carefully read the instructions and precautions below.
PACKAGE INCLUDES:
1 Universal AC Adaptor
4 Pin Connectors, labeled D,E,F and G.
1 Voltage Selector Tool – located on side of the adaptor
1 Compatibility Chart for Voltage selection
One Year Warranty
If you have any questions regarding this product or any other DIGIPOWER product please
e-mail digipowersolutions@mizco.com or call toll free: (866) DG-POWER. Log onto
digipowersolutions.com to see more about DIGIPOWER and our other fine products.
INSTRUCTIONS:
1. Before you power up your digital camera with the ACD-100, refer to our camera
compatibility chart included with this package for your correct Voltage setting. If your camera
is not listed on the compatibility chart included with this package, then contact DIGIPOWER
to check compatibility of the ACD-100 with your camera.
2. Select the appropriate Pin connector and attach it to the output socket at the end of the
output cord.
3. Select your camera’s Voltage from the included compatibility chart and set the Voltage dial
on your ACD-100 to your camera’s setting. To do this, remove the selector tool from the side
of the adaptor (or use a mini flathead screwdriver) and use it to turn the dial (Figure 1). Turn
the dial until the arrow is pointed directly at the Voltage listed next to your camera model on
the chart.
4. Once you have attached the correct Pin Connector and set the correct Voltage, you may
plug the adaptor into your wall outlet. The LED shows power is on.
5. Now you may plug the Pin connector to your camera’s DC in jack and power up your
Digital Camera.
6. The ACD-100 Universal AC power supply is multi voltage (100V-240V) and may be used
in any country. Do not attach any voltage converters to this adaptor.
next