Filter
Top Products
ENGLISH
35
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE POSSIBLE SOLUTION
Unit will not
start.
Cord not
plugged in.
Plug tool into a working outlet.
Circuit fuse is
blown.
Replace circuit fuse. (If the product repeatedly causes the circuit
fuse to blow, discontinue use immediately and have it serviced by an
authorised D
EWALT repair agent.)
Circuit breaker is
tripped.
Reset circuit breaker. (If the product repeatedly causes the circuit
breaker to trip, discontinue use immediately and have it serviced by
an authorised DEWALT repair agent.)
Cord or switch is
damaged.
Have cord or switch replaced by an authorised D
EWALT repair agent.