Filter
Top Products
8- ENG
A16617
4. Assemble a "J" bolt through
frame as shown (both side).
5. Slide handle onto "J" bolts and
attach with knobs (both sides) .
Tighten securely.
6. Feed end of chemical hose
(without filter) through front panel
and press onto barbed fitting of
chemical injector.
ASSEMBLY INSTRUCTIONS
CARTON CONTENTS
Engine Frame and
Wheel Assembly
High Pressure
Hose
Spray Gun
Handle
Chemical
Hose
Bagged Parts
Engine
Manual
Operation
Manual
1. Locate and remove all loose parts
from the carton.
2. Cut four corners of the carton from
top to bottom and lay the panels
fl at.
3. Remove fi ve colored quick
connect nozzles from plastic
bag and insert them into correct
grommet on the nozzle holder.
NOTE: Nozzles are color coded
to match colored nozzles on
panel.
Accessory
Storage Panel
Cover
"J" Bolts
Knobs
Cleaning
Tool
Quick
Connect
Nozzles
Quick Connect Spray Wand