DeVillbiss Air Power Company A08989 Pressure Washer User Manual


 
10- ENG
A08989
The powerful
spray from your
pressure washer is capable of
causing damage to surfaces such
as wood, glass, automobile paint,
auto striping and trim, and delicate
objects such as flowers and shrubs.
Before spraying, check the item to be
cleaned to assure yourself that it is
strong enough to resist damage from
the force of the spray.
READ AND UNDERSTAND ALL WARNINGS BEFORE STARTING UNIT
When using the high-pressure setting, DO NOT allow the
spray to come in contact with unprotected skin, eyes, or
with any pets or animals. Serious injury can occur.
Your washer operates at fluid pressures and velocities high enough to
penetrate human and animal flesh, which could result in amputation or other
serious injury. Leaks caused by loose fittings or worn or damaged hoses can
result in injection injuries. DO NOT TREAT FLUID INJECTION AS A SIMPLE
CUT! See a physician immediately!
NEVER fill fuel tank when engine is running or hot. Do not
smoke when filling fuel tank.
NEVER fill fuel tank completely. Fill tank to 1/2" below top of tank to provide
space for fuel expansion. Wipe any fuel spillage from engine and equipment
before starting engine.
NEVER run engine indoors or in enclosed, poorly ventilated areas. Engine
exhaust contains carbon monoxide, an odorless and deadly gas.
NEVER carry pressure washer with engine running, turn engine off and allow
it to cool before carrying pressure washer.
DO NOT let hoses come in contact with hot engine muffler during or
immediately after use of your pressure washer. Damage to hoses from contact
with hot engine surfaces will NOT be covered by warranty.
NEVER pull water supply hose to move pressure washer.
This could damage hose and/or pump inlet.
DO NOT
use hot water, use cold water only.
NEVER turn water supply off while pressure washer engine is running or
damage to pump will result.
DO NOT
stop spraying water for more than two minutes at a time. Pump
operates in bypass mode when spray gun trigger is not pressed. If pump is
left in bypass mode for more than two minutes internal components of the
pump can be damaged.
If you do not understand these precautions, please call
1-866-4SIMONIZ
(1 866 474 6664)
.