www.desatech.com
118994-01G4
SAFETY INFORMATION
Continued
Clothing or other flammable mate-
rials should not be hung from the
heater or placed on or near heater.
Installation and repair should be
done by a qualified service per-
son. Heater should be inspected
before use and at least annually by
a qualified service person. More
frequent cleaning may be required
as necessary. It is imperative that
control compartments, burners, and
circulating air passageways of the
heater be kept clean.
CAUTION: The gas pressure
regulator provided with this
appliance must be used. This
regulator is set for an output
pressure of 28" W.C. (1 P.S.I.).
22. If replacement is required, use only
regulator with same setting. See Parts
List page 13.
23. Use correct pressure specifications, see
page 9.
24. Propane/LP gas cylinder is not provided.
Use a 20 lb. propane/LP gas cylinder
marked propane. The cylinder supply
system must be arranged for vapor with-
drawal. The cylinder used must include
a collar to protect the cylinder valve. The
cylinder must be provided with a shutoff
valve terminating in a propane/LP gas
supply cylinder valve outlet specified, as
applicable, for connection no. 600 in the
Compressed Gas Association’s Limited
Standard Cylinder Valve Outlet Connec-
tion for Propane Small Valve Series.
PRODUCT
IDENTIFICATION
Figure 2 - Outdoor Patio Heater with Light
Gas Light
(Inside Deco
Shroud)
Burner
(Behind Grill)
Electronic
Ignitor
Cabinet
Base
Assembly
Control
Knob
On/Off
Switch
UNPACKING HEATER
Check all items for shipping damage. If heater
is damaged, promptly inform dealer where you
bought heater.
1. Remove base and weight from box.
2. Remove top cap, 2 deco light shrouds,
top and packaging materials from box.
Set parts aside in a safe location.
3. Remove burner assembly from box, leav-
ing packaging materials on bottom of as-
sembly. Set aside in the upright position.
4. Remove lightpost pieces, cabinet base
and tank door from box. Set aside.