Dekko 36H Lawn Mower User Manual


 
Rev: 8/2008
11 of 21
36B, 36BX, 36H, 36HX, 52H, 52HX
DEK
®
is exclusively distributed by GXi International, LLC
Heavy Duty Power Equipment
On the 36” Honda powered models, there is one cable that func-
tions as a throttle cable, a choke activation cable, and operates a kill
switch. It is important that the cable be positioned correctly in the
connector to permit all three functions.
The throttle cable connector is located at the rear corner of the en-
gine. Insert the throttle cable into the lower of the two holes, insert
the cable into the cable clamp directly above the holes. Adjust the
throttle cable positioning in the clamp to allow the choke lever to
activate when the throttle on the control panel is on the top position.
To make this adjustment you may be required to secure and tighten
the cable clamp a few times as you adjust the cable positioning and
test for choke activation.
On the 52 Hydro models powered by Honda there are separate
throttle and choke cables. Both are connected in the front center of
the engine. The throttle cable is connected to the top lever in the
front hole. The choke cable is connected to the lower lever. See
attached picture. Ensure that the cables are clamped to provide full
travel for the levers on the control panel.
WARNING: FUEL LEAKS OR A LOOSE FUEL TANK OR A
LOOSE FUEL VALVE CAN LEAD TO SEVERE INJURY OR
DEATH. ENSURE ALL CONNECTIONS ARE SECURE AND IN-
SPECT THOROUGHLY FOR ANY POTETIAL LEAKS IN THE
FUEL SYSTEM. IF YOU FIND A LOOSE CONNECTION OR A
LEAK, MAKE AN IMMEDIATE REPAIR OR ASK FOR ASSI-
TANCE FROM A PROFESSIONAL MECHANIC OR SERVICE
CENTER.
DO NOT OPERATE THIS LAWN MOWER IF ANY COMPONENT
OF THE FUEL SYSTEM IS LOOSE OR LEAKS GASOLINE!
Locate the fuel tank on the fuel tank bracket and align the fuel valve
in the center of the clearance hole. Place the fuel tank straps into
position, wrapping them around the tank and the bracket. Note: the
36B model has slots for the straps to feed through. Once the fuel
tank and straps are in place, securely tighten the straps using the
bolts provided. Once secure, firmly attach the fuel line to the fuel
valve nipple. Ensure all connections are firm and secure. Tighten
as required to make sure the fuel system is tightly attached.
Assembly Instructions
Step 4: Throttle and Choke Cable Connections
Step 5: Fuel tank connections
Throttle
cable
clamp
Choke lever motion
Throttle cable clamp
Throttle cable connection
Choke cable clamp
Choke cable connection
Right: 52” Mower Throttle
and Choke Connections
Above: 36” Honda Mower Throttle
and Choke Connection