Filter
Top Products
PTO/ BladeEngageKnob
Activating the PTO engages power to the
cutting deck or other (separately available)
attachments. Pull outward on the PTO/Blade
Engage knob to activate it. Push the PTO/
Blade Engage knob inward to disengage
the power to the cutting deck or other
(separately available) attachments.
NOTE:The PTO/Blade Engage knob must
be in the disengaged (OFF) position when
starting the engine.
PTO
! t
o I
OFF ON
ParkingBrake/CruiseControl Lever
f
(®)
_ J
Located in the center of the tractor's dash panel below the
steering wheel, the Parking Brake/Cruise Control lever is used
to engage the parking brake and the cruise control. Refer to
the Operation section of this manual for detailed instructions
regarding the parking brake.
NOTE:The parking brake must be set if the operator leaves the
seat with the engine running or the engine will automatically
shut offl
NOTE: Cruise control can NOT be engaged at the tractor's
fastest ground speed. If the operator should attempt to do so,
the tractor will automatically decelerate to the fastest optimal
mowing ground speed.
i_ WARNING! Never leave a running machine
unattended. Always disengage PTO, set parking
brake, stop engine and remove key to prevent
unintended starting.
FuelLevelIndicator
The Fuel Level Indicator is located on the left side of the
tractor's dash and indicates the amount of fuel in the gas
tank.
SECTION 4 -- CONTROLS AND FEATURES