Filter
Top Products
Know the Hazards
Power On & Off
15 Power On & Off
Raise/Lower, Tilt & Accessories 16
Raise/Lower, Tilt & Accessories
Raise/Lower lever (standard)
Tilt lever (standard)
Accessory lever (optional)
HYDRAULIC LEVER OPERATION
Pull the lever toward you, away from the mast, and you'll
get the action shown by the symbol in the top of the
lever. Push the lever away from you, toward the mast,
and you'll get the opposite action.
The farther you move the handle from neutral, the faster
the action will be.
For example: Pull the Raise/Lower lever toward
you to raise the forks, as shown by the symbol.
Push the lever away from you to lower the forks.
Note:
The left side of each lever has a different shape, to
help you identify the lever by feel.
KEY UP
• Turn the key clockwise to TEST (yellow dot).
Make certain the display is working.
• Let go of the key and it will return to ON (green dot).
• Turn key counterclockwise to OFF (red dot) to shut
the truck off. Always turn key to OFF when leaving
truck.
POWER DISCONNECT
Pull the battery connector up to disconnect the battery
and cut power to the truck.
Use the power disconnect to shut the truck down any
time it isn't working right. Don't use the truck if it’s not
working right. Report the problem to your supervisor.
HYDRAULIC OPERATIONS CAN AFFECT STABILITY
Capacities shown on your capacity plate are with the
mast vertical. Be extra careful when tilting a load. (This
also applies to other accessories or attachments your
truck may have, such as sideshift, carton clamp, push-
pull, etc.)
TO BEGIN TRAVEL AFTER KEY UP:
• Place direction control in neutral.
• Step down firmly on the service brake pedal, then
release.