Craftsman YT 4500 Lawn Mower User Manual


 
MAINTENANCE
SCHEDULE
Check Brake Operation If I_
T Check Tire Pressure ..11_ I_
Check Operator Presence & ROS System_
R
Check for Loose Fasteners if
A
C ChecWReplace Mower Blades
T Lubrication Chart
0 Check Battery Level
R
Clean Batte_ and Terminals
Check Transaxle Cooling
Check Mower Levelness
Check V-Belts
Check Engine Oil Level I1_ I_
Chanqe Enqine Oil (with oil filter)
Chan_e Engine Oil !without oil filter
[,_EClean Air Filter
G Clean Air Screen
I Inspect Muffler/Spark Arrester
N Replace Oil Filter !If equipped)
E Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
__ R_olace Fuel Filter
1 -Change more often when operating under a heavy load or
in high ambient temperatures.
2 -Service more often when operating in dirty or dusty conditions.
v'
i,,'4
V
V
V
_#'1.2
V,
v"
v'
v'
_1.2
v'
1_1,2
v'2
_2
3 - Replace blades more often when mowing in sandy soil.
4 - Not required if equipped with maintenance-free battery.
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator
must maintain tractor as instructed in this
manual.
Some adjustments will need to be made
periodically to properly maintain your trac-
tor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
(_ Spindle ]y ......... \.r---_(_ Spindle
Zerk ':/;/ I!:' Zerk
_:: _l....... 10"_¢ FrontWheel
@ Front Wheei_ I ::' _Bearing zerk
Bearingzerk /'_r'4 / _" _\ t_''_ _ .
, :_ b" _ LZJLnglne
@Steering-P_'rl _--_ j %'-...//
Sector Gear _-- ' _ .........................)" _ !__.W_ _ Mandrel
! ;_ l/.........\ " _, \w
Teeth _i,, _ i __
i _ LerKs
_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
iMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants will attract
dust and dirt that will shorten the life of the
self-lubricating bearings. If you feet they
must be lubricated, use only a dry, pow-
dered graphite type lubricant sparingly.
19