Craftsman 917.377544 Lawn Mower User Manual


 
The operation of any lawn
mower can result in foreign
objects thrown into the eyes,
which can result in severe eye damage.
Always wear safety glasses or eye shields
while operating your lawn mower or
performing any adjustments or repairs.
We recommend a wide vision safety mask
over spectacles or standard safety
glasses.
HOW TO USE YOUR LAWN MOWER
ENGINE SPEED
The engine speed was set at the factory
for optimum performance. Speed is not
adjustable.
ENGINE ZONE CONTROL
_,CAUTION- Federal regulations require
an engine control to be installed on this Hinge
lawn mower in order to minimize the risk
of blade contact injury. Do not under any
circumstances attempt to defeat the
function of the operator control. The blade
turns when the engine is running.
Your lawn mower is equipped with an
operator presence control bar which
requires the operator to be positioned Formed
behind the lawn mower handle to start tabs
and operate the lawn mower.
TO ADJUST CUTTING HEIGHT
Raise wheels for low cut and lower
wheels for high cut.
Adjust cutting height to suit your
requirements. Medium position is best
for most lawns.
To change cutting height, squeeze
adjuster lever toward wheel. Move
wheel up or down to suit your require-
ments. Be sure all wheels are in the
same setting.
NOTE: Adjuster is properly positioned
when plate tab inserts into hole in lever.
Also, 9-position adjusters (if so
equipped) allow lever to be positioned
between the plate tabs. Plate Tab
Lower Wheels for High Cut_
.o or
Raise Wheels for Low Cut
TO A'I'rACH GRASS CATCHER
Close the lift top lid. Lift top lid must
be closed while operating lawn
mower.
Lift the rear door on the mower
housing and peace the grass catcher
frame onto the formed tabs on the rear
door hinge bracket.
The grass catcher is secured to the
lawn mower housing when the rear
door is lowered onto the grass catcher
frame.
ACAUTION: Do not run your lawn
mower without clipping deflector or
approved grass catcher in place. Never
attempt to operate the lawn mower with
the rear door removed or propped open.
Rear door
Grass catcher
frame
TO EMPTY GRASS CATCHER
To remove grass catcher, release
operator presence control bar to stop
engine.
Lift up rear door and remove the grass
catcher by the handle.
NOTE: Do not drag the bag when
emptying; it will cause unnecessary
wear.
7