Filter
Top Products
TROUBLESHOOTING CHART:
See appropriate section in manual unless directed to Sears service center
PROBLEM
Excessive
bounce/
difficult
handling
Soil balls up
or clumps
Engine runs
but tiller won't
move
Engine runs
but labors
when tilling
1
2
1
CAUSE
Ground too dry and hard.
Wheels and depth stake
incorrectly adjusted.
Ground too wet.
CORRECTION
1 Moisten ground or wait for more
favorable soil conditions
2 Adjust wheels and depth stake.
1 Wait for more favorable conditions.
1 Tine control is not engaged.
2 V-belt not correctly adjusted.
3 V-belt is off pulley (s).
1 Tilling too deep.
1 Engage tine control
2 Inspect/adjust V-belt
3 Inspect V-belt
1 Set depth stake for shallower tilling
2 Throttle control not properly
adjusted.
2 Check throttle control setting.
NEED MORE HELP?
Youqlfindt:heanswerandmoK_on managemyhomemom - ferfree[
o Find this and aLl.your other product manual.s online.
o Get answers from our team of home experts.
o Get a personal.ized maintenance pl.an for your home.
o Find information and tools to he[p with home projects.
breught to you by Sears
19