Craftsman 917.29604 Tiller User Manual


 
MAINTENANCE
SCHEDULE
FILL IN DATES
AS YOU COMPLETE
REGULAR SERVICE
+/
Check Engine Oil Level _ I_
Change Engine Oil
Oil Pivot Points I_
Inspect Spark Arrester/Muffler
Inspect Air Screen ll_
Clean or Replace Air Cleaner Cartridge _2
Clean Engine Cylinder Fins If
Replace Spark Plug I_
Y@7
RH Gear Case Grease Fitting (1oz.) if
1 - Change more often when operating under a heavy load or in high ambient temperatures.
2 - Service more often when operating in dirty or dusty conditions.
DATES
GENERAL RECOMMENDATIONS
The warranty on this tiller does not cover
items that have been subjected to op-
erator abuse or negligence. To receive full
value from the warranty, the operator must QEngi_
maintain tiller as instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your tiller.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
Once a year you should replace the
spark plug, clean or replace air filter, @Idler
and check tines and belts for wear. A Bracket
new spark plug and clean air filter as-
sure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check tine operation.
3. Check for loose fasteners.
LUBRICATION
Keep unit well lubricated (See "LUBRI-
CATION CHART").
LUBRICATION CHART
@Throttle Control
®RH Gear Case
Grease Fitting
@Depth Stake Pin
@Wheel Hub
Shield
Hinges
@ SAE 30 OR 10W-30 Motor Oil
@ Refer to Maintenance "ENGINE" section
® EP#1 Grease
14