Filter
Top Products
PILL,. DATES
R EGU LAR SERVICE /_./_O_sE RVICE DATE S
Check Operator Presence and
T Interlock Systems V _
I R Check for Loose Fasteners V' i1_,
iA
Sharpen/Replace Mower Blades V',
I 0TC Lubrication Chart _
Check Battery Level
a Clean Battery and Terminals If
Check Transaxle Cooling II/
Adjust Blade Belt(s) Tension I_,
v'°Adjust Motion Drive Belt(s) Tension
! Check Engine Oil Level ll_
Change Engine Oil I_12,3 I_"
Clean Air Filter ! II/'_
E
N
E
Clean Air Screen
Inspect Muffler/Spark Arresler
Replace Oil Filter (if equipped)
Clean Engine Cooling Fins
Replace Spark Plug
Replace Air Filter Paper Cartridge
Replace Fuel Filter
Ii1_2
i/
I/_11/
1 . Change r_re often when operating under a heavy load or in hl(}h arr, bienl tetrtperalUteS S . II equipped with adjLl$lable system
2 - Service rnore Often when operating in dirly or dus{y condilions 6 . NO1 req uiced if equipped with rr_inlenat',Ce.lree baflery
3 If equipped with oil tilter, change oil avery 50 hours 7. Tighten front axle pivot bolt I0 35 {I .Ibs maxtn_urn
4 . Replace blades rl_ore often when mowing in s_ndy soil DO noI overtighten
GENERAL RECOMMENDATIONS LUBRICATION CHART
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To
receive full value from the warranty,
operator must maintain tractor as
instructed in this manual.
Some adjustments will need to be made
periodically to properly maintain your
tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear.
A new spark plug and clean air filter
assure proper air-fuel mixture and
help your engine run better and last
longer.
BEFORE EACH USE
• Check engine oil level.
• Check brake operation.
• Check tire pressure.
• Check operator presence and
interlock systems for proper operation.
• Check for loose fasteners.
Tie Rod Ball Joints
,indle
Zerk Zerk
L2")FrontWheel
Bearing
Zerk
Bearing Zerk
Sector
Gear
Teeth _)Engine
19
q>Spray Silicone Lubriant (Move Boots to
Lubricate)
_General Purpose Grease
@Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oil or grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry, powdered graphite type
lubricant sparingly.