Filter
Top Products
_CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
1, Depress brake pedal fully and set parking brake•
2. Place attachment clutch in =DISENGAGED" position.
3. Turn ignitionkey "OFF" and removekey.
4, Make sure the blades and all moving parts have completely stopped.
5. Disconnect spark plug wire from spark plug and place wire where it cannot
come in contact with plug,
TRACTOR
TO REMOVE MOWER
1. Place attachment clutchIn =DISEN-
GAGED" position,
2. If equipped, tum height adjustment
knob to lowest setting.
3. Lowermower to its lowest position.
4. Disengage belt tension md from lock
bracket.
_,CAUTION: Rod is spdng loaded. Have
a tight gdp on rod and release slowly.
5. Remove retainer spring holding anti-
swaybar to chassis bracket and
disengage anti-swaybar from bracket.
6. Remove four retainer spdngsfrom
front plate assembly and remove
plate.
Suspension
BeltTension
Rod
(Disengaged_,,
Positon /7
Chassis
7. Remove retainer springsfrom
suspension arms at deck and disen-
gage arms from deck.
8, Raise attachment liftto its highest
position,
9. Slide mower forward and remove belt
from electric clutch pulley.
10.Slide mower outfrom under dght side
oftractor.
TO INSTALL MOWER
Follow procedure described in =INSTALL
MOWER AND DRIVE BELT"in the
Assembly section of this manual.
Electric
Clutch Pulley
Front Mower
Bracket
Front
Plate
Retainer
Anti-Sway
Bar
(Both Sides)
Bracket
23