Filter
Top Products
MAINTENANCE SCHEDULE _, _/_/_//_'_/_ _/_e,_/
AS YOU COMPLETE _,_ _
Checkerak=Oper=_on t/ t,/
IBIBmm
Check Tlm Pre_ure IV e I_
Check Operator Presm-,ce and
T Interlock _lems I1_
R _ for_o_ F_=t_em I,,/ iV" t,/
A _ Mower Blades I,_'4
T Lubri_Itlo_Che_ li_ li_
0 Ch*_Bm_ kev_ I_,
R aeanBanew_d Te,',_= t/ V*
C_ckTrar=_*Co_k_O I,/
AdlUSt_ BeR(s)T_O_ t/i
AdILU_MoUonDriVeBelt(s) Ten.on _,##_
c_e E_* OU V_u_ V'
E C_ean_r R_r t/=
N clean Air Screen f/z
G Inspect Muffler/SparK Attester
NI RepCsceOqRl_r (If equipped) _.2
E Cie_In En_Jne_ Coo_lng Rn_ _=
R_pl_ceS_k Ru_ I,/ t,/
Replace A_"triter Paper CartridGe I_=
Re_ece Fuel n.er It/
GENERAL RECOMMENDATIONS
The warranty on this tractor does not
cover items that have been subjected to
operator abuse or negligence. To receive
full value from the warranty, operator must
maintain tractor as instructedin this
manual. Some adjustments will need to
be made periodically to properly maintain
your tractor.
All adjustments in the Service and
Adjustments section of this manual
should be checked at least once each
season.
• Once a year you should replace the
spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter
assure proper air-fuel mixture and help
your engine run better and last longer.
BEFORE EACH USE
1. Check engine oil level.
2. Check brake operation.
3. Check tire pressure.
4. Check operator presence and
interlock systems for proper operation.
5. Check for loose fasteners.
LUBRICATION CHART
• )Spindle Spindle
Zerk Zerk
Wh_l
Beadng
Ze_
"(_FmntWheai
Beadng
Ze_
Mandrel
Zerks ',:
i I
_) SAE 30 or 10w30 Moto_Oil
_) General Purpose Grease
(_ Refer to Maintenance =ENGINE" Section
IMPORTANT: Do not oil or grease the
pivot points which have special nylon
bearings. Viscous lubricants willattract
dust and dirtthat will shorten the life of
the sell-lubdcafing beadngs. If you feel
they must be lubricated, use onlya dry,
powdered graphite type lubricant
sparingly.
18