Filter
Top Products
TROUBLESHOOTING CHART
CAUSE
PROBLEM
Loss of drive
CORRECTION
• Place freewheel control in =en-
gaged" position
• Replace motion drive belt.
• Purge transmission,
• Freewheel control in "disen-
gaged" position.
• Motion drive belt worn, dam-
aged or broken.
• Air trapped in transmission
during shipment
or servicing
• Engine throttle control not set
at "SLOW" position for 30 sec-
onds before stopping engine
Engine =backfires" • Move throttle control to "SLOW"
when turning engine positionand allow to idlefor 30
"OFF" seconds before stopping engine.
30