Craftsman 900.37051 Lawn Mower User Manual


 
To Unfold Handle
Raise the handle section into place and
secure by tightening the two knobs. See
figure below.
WARNING: For your own safely DO NOT
use this mower without either the
Grasscatcher or Mulch Insert in operating
position.
Knobs Handle
GRASSCATCHER ASSEMBLY
Slide the grassbag onto the grasscalcher
frame. (See Fig. A)
The grassbag has attachment clips sewn
around the bag opening.
Attach the two top clips to the frame,
then altach the side clips, and lastly the
bottom clip. (See Fig. B)
Refer to "To Install Grasscatcher"
instruction before attaching to mower.
@ clip b
TO INSTALL GRASSCATCHER
Reach down between the mower handle
and raise the rear door to a vertical
position. (See Fig. A)
Remove the mulch insert. See page 10
To Remove Mulch Insert.
Pick up the grasscatcher by the handle
and lower the grasseatcher between the
lawnmower handles. Position the
grass- catcher hanger hooks on the
metal rod under the rear door.
(See Fig. B).
Release the rear door.
WARNING: Never operate the mower
unless the hanger hooks on the
grasscatcher are seated properly, and the
rear discharge door rests firmly against
the top of the grasscatcher.
KNOW YOUR MULCHING MOWER
READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
MULCHING MOWER. Compare the illustrations with your mulching mower to
familiarize yourself with the location of various controls and adjustments. Save this
manual for future reference.
These symbols may appear on your mulching mower or in literature supplied with the
product. Learn and understand their meaning.
CAUTION
OR WARNING
DA| !
J"_""-" DANGER, KEEP HANDS
I _, AND FEET AWAY
Grasscatcher
Operator
Presence
Control
Switch
Door
Height
Indicator
MEETS CPSC SAFETY REQUIREMENTS
Sears rotary walk-behind power lawn mowers conform to the safety standards of the
American National Standards Institute and the US. Consumer Product Safety
Commission.
WARNING: The blade always turns when the motor is running.
Operator Presence Control Switch - Must be held to the handle to slad and run the
motor. Release to stop the motor.
Door - Allows conversion from mulching or bagging operation.
Height Adjustment Control -- Allows for simple one touch height adjustmenl of all
four wheels at one time.