Filter
Top Products
cords are available.) Do not use mul-
tiple cords.
• In good condition. Cord insulation
must be intact with no cracks or
deterioration. Plug connectors must be
undamaged. DO NOT use multiple
cords. Cord
Receptacl
MINIMUM WIRE GAUGE Recessed
RECOMMENDATIONS
on Unit
VOLTS 25 FT. 50 FT. 100 FT.
120 A16WG 16 14 Cord
.* A.W.G * A.W.G * Retainer
•American Wire Gauge
Secure the extension cord to the unit by
threading the cord through the cord re-
tainer (see illustration). Insert the cord
receptacle into the recessed plug.
KNOW YOUR ELECTRIC BLOWER
READTHIS OPERATOR'S MANUALAND SAFETY RULES BEFOREOPERATING YOUR
UNIT.Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
ON/OFF Switch _Top HandIe
Cord _ --_---- Air Vents
Retainer
Rear
Hand_
_"_'Upper Vacuum Tube
Inlet Cover Retaining Post
Latch
Bu_on
Blower Tube
_Iet Restrictor
Collection Bag
Elbow
Tube
Vacuum Assist Handle
Upper Vacuum Tube
LowerVacuum Tube
-'===
The ON/OFF SWITCH is used to
activate the motor.
The INLET COVER LATCH is used to
open and close the inlet cover and to
secure the upper vacuum tube to the
blower unit.
The SLOWER TUBE is designed to di-
rect the flow of air.
The INLET RESTRICTOR improves the
blower function.
The TUBE RELEASEBU]qON secures
the blower tube or elbow tube to the
blower unit during operation. Also,
pressing the tube release button allows
removal of the blower tube or elbow
tube.
8