Filter
Top Products
KNOW YOUR BUSHWACKER
Your new B[JSHWACKER has been carefully packed at the factory to prevent damage during shipping and storage,
however, even with the best of preventative measures, damage does sometimes occur It is recommended that you follow the
check out procedures listed below:
Remove all items from the carton, lay them out and check the parts Io be sure that you have everything required for
assembly. Also check carefully for any visible damage. (IN THE EVENT THA'F SOMETHING IS DAMAGED OR MISSING
OR BOTH, NOTIFY YOUR SEARS STORE IMMEDIATELY,)
i
You should familiarize yourself with the various parts of your BUSHWACKER before attempting to assemble or operate
the unit, Refer to drawing below.
SPECIFICATIONS
TYPE
DISPLACEMENT
u_ I CARBURETOR
z l FUEL TANK
_ !CAPACtTY
SPARK PLUG
LUBRICATION
J
DRYWEIGHT
DIMENSION
2 cycle air-cooled
2013 cc 1i,24 Cu' In,)
O ,p.ragmtype ..................
17,5 UoSoff. oz,. (0°5£)
NGK BM7A or CHAMPION CJ 6.
Fuel oil Mixed 16 to 1
(1 gal. gasoline to 8 oz, oil)
t0.5 ibs (4.8 kg)
35.5 × 8,7 x 8,6 in,
I OVERALL LENGTH i 18"TOOTH PITCH j 0.98"
i ENGINE RPM 8000 rpm
CUTTING STROKES 32°2 times/see (8000 rpm}
....... PER MINUTE
DRIVE SYSTEM
CLUTCHTYPE Dry Centrifugal
CLUTCH ENGAGE. 3800 rpm -+200 rpm
MENT
BLADE DRIVE Double cam drive
"SEARS CATALOG NUMBER-36402
FRONT HANDLE
ENG
STARTLER KNOB
START/STOP SWITCH
TH ROTTLE
LEVER
UPPER BLADE
GUIDE P_T i
REAR HANDLE
FUEL TANK
LOWER BLADE
SHIELD
* Specifications are subject to change without notice,