Filter
Top Products
, Remove the plastic cap from the high pressure out-
let. Feed the high pressure hose through the hose
guide and then connect the hose to the outlet.
• Place assembled spray gun on holder.
HOSE GUIDE
• Connect nozzle extensk)n to spray gun.
CHECKLIST
Before you operate your new high pressure washer,
to be sure you receive the best performanceand sat-
isfaction from this quality product, please review the
following checklist:
° All assembly instructionshave been completed.
° The high pressure hose connections to the spray
gun and to the pump are tight and secure.
While learning how to use your high pressure
washer, pay extra attention tothe foil0wing important
items:
• Engine oil is at proper level
• Be sure gas tank is filled properly with clean,
fresh, unleaded gasoline.
, Become familiar with all controls - their location
and function. Operate those controls before start-
ing the engine.
I CAUTION: Any'attempt to crank or start }
the engine before it has been properly I
serviced with the recommended oil may I
result in an engine failure. See Pages 8 I
and 9 for instructions on adding oil and
proper oil specifications, I
ASSEMBLY PARTS PACKED IN MANUAL BAG SHOWN FULL SIZE
(4) #10 Self-drilling Screws
(4) Flat Washers
IlJI1EtIIIiIlIJtlIiliIi!Viiiiiii]li
(4) Hex Head Capscrews - M8 x 50ram
(4) Lock Washers
(4) Hex Nuts