Craftsman 51158 Cultivator User Manual


 
KNOW YOUR CULTIVATOR ATTACHMENT
READ THIS iNSTRUCTiON MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
CULTIVATORA'i-FACHMENT Compare the illustrations with your attachment to familiar-
ize yourself with the location of the various controls and adjustments. Save this
manual for future reference.
Hanger
Shaft
Tine Guard
Cutting Tines
CUTTING TINES
The CUTTING TINES are designed to
loosen soil.
TINE GUARD
The TINE GUARD provides partial
protection from the rotating tines.
OPERATING THE COUPLER
Your powerhead is equipped with a
coupler which enables optional attach-
ments to be installed. The optional
attachments are:
Edger ............. 71-51157
Blower ............ 71-51160
Pruner ............ 71-51161
Brushcutter* ....... 71-51159
*not designed for use with electric
powerheads
_ WARNING: Always disconnect
powerhead spark plug (or disconnect
powerhead from power source) before
removing or installing attachments.
REMOVING ATTACHMENT
CAUTION: When removing or instal-
ling attachments, place the power-
head and attachment on a flat surface
for stability.
1. Loosen the coupler by turning the
knob counterclockwise.
Coupler
Lower
Attachment
Upper Shaft
TIGHTEN Knob
2. Press and hold the locking/release
button.
Locking/Release
Button
Upper Shaft
Lower Attachment
3. While securely holding the upper
shaft, pull the attachment straight
out of the coupler.