Filter
Top Products
TOOLS REQUIRED FOR ASSEMBLY
(1) 3/4" Wrench or Adiustable Wrench
(1) 11/16' Wrench or Adjustable Wrench
(1) 5/8" Wrench or Adjustable Wrench
(2) 9/16" Wrenches or Adjustable Wrenches
(2) 1/2" Wrenches or Adjustable Wrenches
• Remove the hardware pack and all parts from the
carton. Be sure the carton is empty before discard-
ing,
• Lay out ell parts and hardware as shown on page 3.
FOR TRACTORS RESEMBUNG FIGURE 1:
• Remove the boltfrom the holeon each side ofthe
tractorframe as shownin figure 1.
• Assemblethe twoshoulderboltsto the now empty
holes.Tighten. See figure 1,
SHOULDER BOLT
FIGURE 1
FOR TRACTORS RESEMBLING FIGURE 2:
• Remove the boltand nutfrom the holeon each side
ofthe tractorframe as shownin figure 3,
• Assembletwoshoulder boltsand 3/8"flanged lock
nutsto the now empty holes.Tighten. See figure3.
SHOULDERBOLT
,3/6.FLANGED
_LOCKNUT
FIGURE 3
• Assemblethe rightand leftmountingbracketstothe
hitchbracket usingfour5/18' x 3/4" hex bolts and
5/16" hex locknuts, Do not tighten yet. See figure4,
LEFTHAND
MOUNTINGBRACKET_J _14a.Mm,,
RIGHTHAND _ J 5/16"x 3/4"
MOUNTINGBRACKET_ 1.7 HE)(BOLT
FIGURE 4
Assemble the righthandand lefthand mounting
bracketstothe hitchbracket usingfour 5/16" x 3/4"
hex bolts and 5/16" hex locknuts.Do not tighten
yet. See figure 2.
LEFTHAND
MOUNTING _ 5/16. HE)(
HITCHBRACKET dl . / 5/16. x 3/4"
7 L/ HEXBOLT
RIGHTHAND
MOUNTING
BRACKET
FIGURE 2
FOR BOTH TYPES OF TRACTORS
• Assemblethe brace strapto the mountingbrackets
usingtwo 5/16' x 3/4" he:<bolts and 5/16" hex lock
nuts. Do not tighten yet. See figure 5.
• Assembletwo3/8" x 1• hax bolts, bushingsand 3/8"
flangedlock nutsto the slotsin the hitchbracket. Do
not tighten yet. See figure 5.
5/6. x 1" 5/16"x3/4"
HE)(BOLT_,_tl HEXBOLT
BRACESTRAP __*
FIGURE 5
4