Filter
Top Products
STEP 5: (SEE FIGURE 6)
* Spread ends of bumper enough to fit slots onto bolts
in rear mounting holes in tractor frame.
* The bumper has three mounting holes. The rear
holes provide the most clearance while the forward
holes provide a neater appearance. Use a hole that
provides enough clearance for the hood to stay in
raised position when opened. Place a washer onto
a carriage bolt and insert the bolt through the tractor
frame and into desired mounting hole on each side of
bumper. Secure with a whizlock nut.
iMPORTANT: Before fully tightening nuts, be sure
tractor hood will stay in raised position when opened.
CARRIAGE BOLT
AND WASHER
WHIZLOCK NUT
FIGURE 6
STEP 6: (SEE FIGURE 7)
* Replace the browning shield using the front screws
you removed in Step 2.
REPLACE
FRONT SCREWS
REPLACE
BROWNING SHIELD FIGURE 7
4 Call 1-866-576-8388 for missing parts or assembly help
DO NOT RETURN TO STORE