Filter
Top Products
6
FIGURE 6
FIGURE 7
• Assemble the latch stand plate and the latch stand
bracket to the bottom of the poly tray using four
1/4" x 3/4" hex bolts, 1/4" flat washers and 1/4"
hex nuts. Tighten. See figure 6.
• Place the poly tray down onto the wheel support,
positioning it so that the latch stand bracket snaps
under the latch lock lever. Fasten the tray to the
wheel support using eight 5/16" x 3/4" truss head
bolts and 5/16" hex nuts as shown in figure 7.
Tighten.
1/4" FLAT
WASHER
1/4" HEX NU
T
1/4" x 3/4"
HEX BOLT
LATCH STAND
BRACKET
LATCH
STAND PLATE
5/16" HEX
NUT
5/16" x 3/4"
TRUSS HEAD
BOLT
LATCH LOCK
LEVER