then tighten the multi-functionhandle to blower
with the two screws (Fig. 3, H).
FIGURE 3
4. Oncethe handle issecured, the blower tubewith
- handlecan betwisted and swiveled. Ensurethat
thethrottlecable doesnot become pinched or
trappedwhen swiveling handle.
.5. Installthe extensiontube (if desired) ontoblower
tube by aligningthe tab on the extensionwiththe
correspondingarea on blower tube; then push
togetherand twist to secure.
6. Installthe curvednozzle tube in the same manner.
Twistto secure.
KNOW YOUR BACKPACK AIR BLOWER
Read this Operator's Manual and Safety Instructionsbeforeoperatingyourbackpackair blower. Compare the
illustrationbelow (Figure4) with your backpack airblowertofamiliarize yourselfwith the locationof variouscontrols
and adjustments.Save this manualfor future reference.
1. On-off switch
2. Throttlelever
3. Speed lever
4. Pdmer
5. Choke lever
6. Airfilter cover
7. Fueltank cap
8. Starter rope handle
9. Spark plug
10. Muffler
11. Carburetoradjustment screws
5
12. Anti-vibrationsprings
13. Quickrelease carryingstrep
14. Carryingstrap
15. Carryingfreme
16. Pleated tube
17. Blowertube
18. Extensiontube
19. Curved nozzletube
20. Blowerhousing
21. Clamp
22. Clampwithcable guide
FIGURE 4
