Filter
Top Products
MINIMUM WIRE GAUGE
RECOMMENDATIONS
100 FT.
A. IW4G.*
*American Wire Gauge
Secure the extension cord to the unit by
threading the cord through the cord re-
tainer (see illustration). Insert the cord
receptacle into the recessed plug.
CAUTION: Failure to use cord retain-
er could result in damage to the unit,
extension cord, or both.
Cord
Receptacl_
°°tl,
Recessed
KNOW YOUR ELECTRIC BLOWER
READ THIS OPERATOR'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR
UNIT. Compare the illustrations to your unit to familiarize yourself with the location
of the various controls and adjustments. Save this manual for future reference.
ON/OFF Switch ____.__-_ Variable Speed Control
Cord ( _'_'_ Air Vents
Retainer?___ I_ ( \t I
HR:nad,_ _ Upper Vacuum Tube
Inlet Cover Retaining Post
Latch
Blower Tube
Collection Bag
Elbow
Tube
Vacuum Assist Handle
Upper Vacuum Tube
Lower Vacuum Tube
_,// =::==:::=i
/
ON/OFF SWITCH
The ON/OFF SWITCH is used to acti-
vate the motor.
INLET COVER LATCH
The INLET COVER LATCH is used to
open and close the inlet cover and to
secure the upper vacuum tube to the
blower unit.
BLOWER TUBE
The BLOWER TUBE is designed to di-
rect the flow of air.
INLET RESTRICTOR
The INLET RESTRICTOR improves the
blower function.
TUBE RELEASE BUTTON
Tile TUBE RELEASE BUqq-ONsecures
the blower tube or elbow tube to the
blower unit during operation. Also,
pressing the tube release button allows
removal of the blower tube or elbow
tube.
VARIABLE SPEED CONTROL
The VARIABLE SPEED CONTROL is de-
signed to allow an increase or de-
crease in motor speed as necessary
during blower use only. To avoid caus-
ing damage to the unit, DO NOT at-
tempt to use the variable speed control
during vacuum use.
8