Filter
Top Products
TROUBLESHOOTINGTABLE
,_ WARNING: Always stop unit and disconnect from the power source before
performing all of the recommended remedies below except remedies that re-
quire unit to be operating.
SYMPTOM
Unit fails to
operate.
CAUSE
1. Switch in the OFF position.
2. Extension cord discon-
nected.
3. Circuit breaker tripped, or
fuse blown.
4. Mechanical failure
REMEDY
1. Slide switch to ON position.
2. Reconnect extension cord.
3. Reset circuit breaker or
fuse.
4. Contact Sears Service
(see back cover).
1. Contact Sears Service
(see back cover).
Unit 1. Mechanical failure
vibrates
abnormally.
Impeller will 1. Debris in air intake area. 1. Clean unit. Remove any
not turn debris.
freely. 2. Mechanical failure. 2. Contact Sears Service
(see back cover).