Filter
Top Products
4
ASSEMBLY
Assembly is easy and requires no tools.
●
1 Position the lower stem (the straight tube)
with the silver button toward the back.
Using the bolt and knurled knob,
attach the search coil to the
plastic extension protruding
from the lower stem.
●
2 Press the button on
the upper end of
the lower stem,
and slide the lower
stem into the
upper stem.
Adjust the stem to a length
that lets you maintain a
comfortable upright
posture, with your arm
relaxed at your side, and
the search coil parallel to
the ground in front of you.
●
3 Wind the cable securely around the stem.
●
4 Insert the plug into the
matching connector on
the right underside of the
detector body. Be sure
that the key-way and
pins line up correctly.
Caution: Do not force the
plug in. Excess force
will cause damage.
To disconnect the
cable, pull on the
plug.
Do not pull
on the cable.