Filter
Top Products
7
17
22
13 14
15
23
10
11
15
CHAroN SAW COMPONENTS
1. GUIDE BAR
2. SAW CHAIN
3. SAW CHAIN ADJUSTMENT SCREW
4. SPARK ARRESTER SCREEN
5. CHAIN BRAKE' LEVER/HAND GUARD
6. FRONT HANDLE
7. STARTER HANDLE
8. SPARK PLUG
9. AIR CLEANER COVER
10. STOP SWITCH
11. SAFETY TRIGGER
12. BAR OIL RESEVOIR CAP
13. STARTER COVER
14. FUEL TANK CAP
15. REAR HANDLE / BOOT LOOP
16. THROTTLE LATCH
17. RED CHOKE LEVER
18. BAR RETAINING NUTS
19. THROTTLE / TRIGGER
20. CHAIN CATCHER
21. CHAIN BRAKE r COVER
22. MULTI-PURPOSE TOOL
23. CARRY CASE
SAFETY FEATURES
2. LOW KICKBACK SAW CHAIN heirs siqnificantly
reduce kickback, or the intensity of kicRback, due to
spedally designed depth gauges and guard links.
3. CHAIN SAW ADJUSTMENT SCREW It is normal for a
new chain saw chain to stretch after the first 30 min-
utes of use. Check the tension of the chain
reguhrly to ensure the best performance, see SAW
CHAIN ADJUSTMENT under MAINTENANCE AND
REPAIR INSTRUCTIONS.
10. STOP SWITCH immediately stops the engine when
pushed up. Stop s?vitch must be pushed down to
start or restart engune.
11. SAFETY TRIGGER prevents acddentd acceleration
of the engine. Throttle trigger (19) cannot be
squeezedunless the safety trigger is depressed.
17. RED CHOKE LEVER aids in starting the engine.
19. THROTTLE TRIGGER controls engine speed.
20. CHAIN CATCHER reduces the danger of injury in
the event saw chain breaks or derauls during oper
ation. The chain catcher is designed to intercept a