Filter
Top Products
MAINTENANCE eEFOnE EVERY EVERY EVERY EVERY EVERY BEFORE
SCHEDULE EACH . 25 _o _so s_so. STORAGE
USE HOURS HOURS HOURS HOURS
,,:Chectt; Brake Operation .................._ .......................V : :
J v'
Check Tire Pressure .......................
T Check Operator P[esence & ROS Systems
I v"
A Check for Loose Fasteners
C ,ChectdReplace Mower Blades
T Lubrication Chart
0 Check Battery Level
R
G
!
N
E
Vr3 ...................................
v' v'
J,,
C!ean Battery and Terminals 6/ .............................. V w
Clean Debris Of! Ste.ering Plate . : : I_s
Cheek Transax_e Cooling
Check Mower Levelness
Check V-Belts
Check Engine Oil Level ..............................................
Chanqe Engine O!I (wi!b oil fil{er)
Change Engine Oil (without oil liI_er)
Clean Air Fliler
Clean Air Screen.................................
Inspect MulfIer/Spark Arrestor ..........
Replace Oil Filter (if equipped)
Clean Eng!ne Cooling Fine .............
Replace Spark Plug .......................................
Replace Air Fitter Paper Cartridge ............
Replace Fuer Filler
v"
V_!,2
................... " ' _,2
GENERAL RECOMMENDATIONS
The warranty on this tractor does not cover
items that have been subjected to operator
abuse or negligence. To receive full value
from the warranty, operator must maintain
tractor as instructed in this manual,
Some adjustments will need to be made pe-
riodically to properly maintain your tractor.
At least once a season, check to see if
you should make any of the adjustments
described in the Service and Adjustments
section of this manual.
• At least once a year you should replace
the spark plug, clean or replace air filter,
and check blades and belts for wear. A
new spark plug and clean air filter assure
proper air-fuel mixture and help your en-
gine run better and last longer.
BEFORE EACH USE
1. Check engine oil level°
2, Check brake operation,
3, Check tire pressure.
4. Check operator presence and
ROS systems for proper operation.
5. Check for loose fasteners,
LUBRICATION CHART
_.,Spindle
Front Front
Wheel Wheel
Bearing Bearing
zerk zerk
_ Engine
Steering
Sector _,
Gear Mandrel
Teeth Zerks
Zerk
General Purpose Grease
(_) Refer to Maintenance "ENGINE" Section
IMPORTANT: Do not oilor grease the pivot
points which have special nylon bearings.
Viscous lubricants will attract dust and dirt
that will shorten the life of the self-lubricating
bearings. If you feel they must be lubricated,
use only a dry,, powdered graphite type lu-
bricant sparingly.
21