Filter
Top Products
DR
®
POWERWAGON
™
Safety & Operating Instructions 1
Assembly
The DR
®
POWERWAGON
™
is shipped almost completely assembled. Please read the
following instructions before
removing the machine from the crate and completing the
assembly.
Parts Bag Contents
:
(1) 5/16" x 1-1/2" Bolt for the Handlebar
(1) 5/16" Lock Nut for the Handlebar
(1) Cable Tie for the Cable Assembly
Install the Upper Handlebars
Tools Needed:
(2) 1/2" or adjustable wrenches
1. Position the cable assembly on the right
side of the frame (when standing in the
operating position). Secure the cable
assembly to the frame with the cable tie
provided (Figure 1).
2. Position the upper handlebar inside the
lower handlebar, mount the 5/16" x 1-1/2"
bolt and secure it with the 5/16" lock nut
(Figure 2). You may adjust the handlebar
height at any time by removing the bolt
and repositioning the upper handlebar in a
different hole.
Figure 1
Figure 2
WARNING!
The DR
®
POWERWAGON
™
is shipped
without gas and oil. DO NOT attempt to
start your DR
®
POWERWAGON
™
until
assembly is complete, and you've added
the correct amounts of gas and oil.