Filter
Top Products
louvered series—design features
BSL
square louvered series
BRL
ROund dome top
louvered series
louvered series—design features
Top
Rugged, minimum 5/32" thick cast aluminum top
cap secured via a concealed stainless steel allen
screw with twist removal mechanism for lamp
access. Flow through ventilation assures cool to the
touch top.
louvers
Cast Aluminum Louver blades provide sharp cutoff
providing no direct light above 90°. Louvers are
secured to the shaft via tamper resistant stainless
steel rods and fasteners.
lamp enclosure
Lamp enclosure is one-piece tempered glass with
internal flutes for even disbursement of illumination.
Decorative colored glass optional. Globe is fully
gasketed via EPDM material. Socket is porcelain,
medium-base for HID lamp sources.
lower housing
Nominal 1/8" thick extruded aluminum housing.
Bollard housing is secured to the base with flathead,
counter-sunk screws for smooth, uncluttered
appearance.
Electrical
High Power Factor ballast for –20°F starting.
Product is factory mounted to the base. Quick
disconnects provided between lamp and electrical
assembly. Metal Halide and High Pressure Sodium
lamp sources up to 100W Metal Halide or High
Pressure Sodium coated lamps.
finish
Premium fade and abrasion resistant, TGIC
Polyester Powder Coat Finish. Standard colors are
Bronze, Architectural White, Grey and Black. Other
architectural finish colors available including all
RAL matches.
Base
Rugged cast aluminum. Completely concealed.
Mounting
Base mounts onto foundation with three (3) 1/2" x
12" anchor bolts on a 5" Dia. bolt circle (a centrally
located 2 7/8" x 3 1/2" wire entrance opening
provided).