Coleman 2200 Pest Control Equipment User Manual


 
8
Proper Inhibitor and Trap Placement
1. Placement of the trap – find an area of your yard that is
shaded, cool, or well protected by brush. Refer to the Quick
Tips Sheet.
2. Mosquitoes breed in standing water or areas that become
flooded with water during rain storms. Mosquitoes will also
take cover under low lying brush to stay cool on warm days.
3. The trap should be placed in an area away from where
people gather. We recommend a distance of at least 50
feet away from people.
4. Positioning of the device is very important. If you are not
catching mosquitoes, move the unit to another area of the
yard that is protected from wind and direct sun and is near
water. Try each location for a minimum of 2 days.
5. The Trap is designed to operate around the clock in your
yard. The Trap continuously attracts, traps, and kills mos-
quitoes all day and all night.
6. Together, the Mosquito Deleto
TM
Inhibitor and Trap are a
strong defense against mosquitoes!
7. Place the inhibitor unit per instructions in the inhibitor
package.
To Turn On cont.
To Turn Off
Verify ignition by observing gauge:
Turn cylinder valve OFF.
Unit can be moved from location
to location by using the handle
on the unit as shown.
Allow to cool for approximately
45 minutes before replacing lure
or adhesive trap.
To Move Unit
CAUTION
If the needle enters the red
zone (HOT) on the gauge,
immediately turn off the unit
& call Coleman at
1-800-835-3278.
Repeat this process each time you restart of the unit.
Start Up
Approximate
Consumable Usage
• Propane: 40 days.
• Octenol Lure Refill: 1 month.
• Adhesive Trap: Approximately
2 weeks or when full.
3-5 minutes (Normal)
Unit operating properly when
needle in green zone