Filter
Top Products
6 – ENGLISH
7 – ENGLISH
3 Release the “on-hook” switch or pick up the handset and listen for a dial tone.
4 Continue this process until you hear a dial tone and the microphone
is functional. Once you have located the proper setting, make a note
of it in the event it is changed accidentally or you use your IL95 on a
different phone.
NOTE: The IL95 cannot be used on any telephone where the keypad is located in
the handset.
Troubleshooting
If, after installing your IL95 Amplifier, you do not have a dial tone or the person you called
cannot hear you, take the following steps:
1 Check that all connections are plugged in properly
2 Make sure power is connected
3 Either disconnect the unit or use another phone and check that your
phone service is working properly.
4 Change the compatibility setting dial located on the bottom of the unit.
IL-95.indd 6 5/28/08 4:24:47 PM