Classen SC-16 Brush Cutter User Manual


 
10
ONE YEAR LIMITED WARRANTY
Effective January 1, 1994
For the period of one year from the date of purchase, CLASSEN MFG., INC. will repair or replace for the original purchaser (90
days if used for rental purposes) free of charge, any part or parts found upon the examination of our factory authorized service
station, or by the factory in Norfolk, Nebraska, to be defective in material or workmanship. All transportation charges on parts
submitted for repair or replacement under this warranty shall be borne by the purchaser.
This warranty does not include engines or engine parts, tires, batteries, or gearboxes that are covered under separate warranties
furnished by their manufacturer or supplier, nor does it include normal maintenance parts, including but not limited to, spark plugs,
points, filters, blades, and lubricants.
All service under this warranty will be furnished or performed by our factory authorized service stations.
There is no other expressed warranty. Implied warranties, including those of merchantability and fitness for a particular purpose, are
limited to one year from the date of purchase or 90 days if the product is rented and to the extent permitted by law any and all
implied warranties are excluded. The above remedy of repair and replacement of defective parts is the purchaser's exclusive remedy
for any defect, malfunction or breach of warranty. Liability for incidental or consequential damages under any and all warranties is
excluded to the extent permitted by law.
NORMAL RESPONSIBILITIES OF THE SELLER AND THE USER
1. The Distributor or Dealer is responsible for the proper assembly and preparation of the product for delivery to the end user.
2. The User is responsible for reading the Manual and Instructions.
3. The User is responsible for proper operation and maintenance as described in the manual.
4. The User is responsible for the replacement of wear items such as blades, belts, tires, batteries, etc.
5. The User is responsible for damage due to improper operation and maintenance, as well as abuse.
All claims must be received by the factory 30 days after the end of the warranty period to receive warranty consideration.
Schiller-Pfeiffer, Inc.
1028 Street Road • Southampton, PA 18966
Telephone: 1-800-366-6268
©2006 Classen, Division of Schiller-Pfeiffer, Inc. 3/06