Filter
Top Products
2
PLACING THE LANTERN BODY ON THE FRAME
1. Open all four zippers on the top of the Lantern body.
2. Turn the Speed Ring vertically with one pole pointed up.
3. Align one of the corner seams in the Lantern body with the upward-facing pole
(photo 5).
4. Pull the body over the pole until the curve in the pole fits in the curve in the
body.
5. Pull the rest of the body over the remaining poles. The last corner assembled
will go on tighter than the others corners.
6. Close the zippers on top of the Lantern (photo 6).
7. The fully assembled Lantern will appear as in photo 7.
8. Attach the assembled Lantern to the light fixture.
9. Attach the light fixture to a light stand or boom arm.
Photo 5 Photo 6 Photo 7
MOUNTING THE SKIRT ON THE LANTERN
1. Unzip one of the corner zippers in the Skirt from top to bottom.
2. Wrap the Skirt around the Lantern, making sure the corners are aligned.
3. Align the hook-and-loop strips on the Skirt with the hook-and-loop strips on the
Lantern and press the two together (photo 8).
4. Zip up the open zipper (photo 9).
5. Adjust the Skirt as desired by unzipping the corner zippers from bottom to top
and rolling up the sides (photo 10).
Photo 8 Photo 9 Photo 10
1812 Valtec Lane, Boulder, CO 80301 303-444-8000 888-444-1812 fax 303-444-8303 sales@chimeralighting.com