Filter
Top Products
Installation Instructions TPA-100
2
TOOLS REQUIRED FOR INSTALLATION
• 5/32” Allen wrench, security (provided)
• Phillips screwdriver
INSTALLATION
To install the finishing cover, do the following:
Assemble the Finishing Cover
Assemble the finishing cover, as follows:
NOTE: If security screws are used, use the 5/32”
security Allen wrench (30).
1. Using three 10-24 x 3/8” pan head cap screws (40) or
three 10-24 x 3/8” button head cap screws (50),
attach the top cover (20) frame onto the pole mount
cover (10). See Figure 2.
2. Repeat Step 1 to attach the bottom cover (20) frame
to the pole mount cover (10).
Install the Finishing Cover
Install the finishing cover, as follows:
1. Place the pole mount cover (10) over the pole mount
and pole (see Figure 3).
NOTE: If security screws are used, use the 5/32”
security Allen wrench (30).
2. Using two 10-24 x 3/8” pan head self-tapping screws
(60) or two 10-24 x 1/2” sheet metal security screws
(70), attach the assembled pole mount cover (10) to
the mount at the top. See Figure 3.
3. Repeat Step 2 to attach the assembled pole mount
cover (10) to the mount at the bottom.
Figure 2. Assemble the Finishing Cover
Figure 3. Install the Finishing Cover
10
40
or
50
20
Moun
t
10
60
or
70
Pole