Filter
Top Products
Page 16For technical questions, please call 1-800-444-3353.SKU 66619
Storage
Wait for the Engine to cool, then clean 1.
the Engine with a clean cloth.
When the equipment is to remain idle for 2.
longer than 20 days, prepare the Engine
for storage as follows:
Empty the Fuel Tank and drain all fuel a.
lines.
Clean out area around Spark Plug. b.
Remove Spark Plug and pour one
tablespoon of engine oil into Cylinder
through Spark Plug hole.
Reinstall Spark Plug, but leave the c.
Spark Plug Wire disconnected.
Pull Starter Handle to distribute oil d.
in Cylinder. Stop after one or two
revolutions when you feel the Piston
start the compression stroke (when you
start to feel resistance).
Apply a thin coat of rust preventive oil to 3.
all uncoated metal parts.
4.
area out of reach of children.
Maintenance and Cleaning
Schedule: Generator
Before Every Use:
Check to make sure all bolts and nuts a.
are tight.
Check for any damage to the Generator. b.
If damaged, do not use until repaired by
After Every Use:
Allow the unit to completely cool. Then a.
clean the exterior of the Generator with
a clean cloth.