Filter
Top Products
4. Operating Instructions 10 1/6/2010 11:34 AM
Standalone Operation
Automatic
This fixture has preprogrammed chases. These are accessed via the DIP switches on the back of the
fixture. Please see the instructions below for further explanation.
1. Set DIP switch [10] to the ON position.
2. Set DIP switch [9] to the OFF position.
Sound-Active
This fixture has preprogrammed sound triggered chases. These are accessed via the DIP switches, and
the speed may be adjusted using the audio adjustment knob. Please see the instructions below for further
explanation.
1. Set DIP switch [9] to the ON position.
2. Set DIP switch [10] to the OFF position.
Custom Static Color Mixing
This fixture has the ability to accept custom settings. These are accessed via the DIP switches. Please see
the list below for these DIP switch settings.
Function DIP switch
Red 1
Green 2
Blue 3
Strobe Speed 4~8
The rotation speed is fixed to the default setting in this mode. It is not possible to adjust this speed in
standalone operation.
DMX Channel Values
CHANNEL
VALUE
FUNCTION
1
000 255
021 040
041 060
061 080
081 100
101 120
121 140
141 160
161 180
181 200
201 220
221 240
241 255
Mode
No Function
Red
Green
Blue
Red/Green
Red/Blue
Green/Blue
Red/Green/Blue
Mode 1
Mode 2
Mode 3
Mode 4
Sound
2
000 009
010 255
Strobe (only when CH.1 is between 021~240)
No Function
Slow ~ Fast
3
000 009
010 255
Run Speed (only when CH.1 is between 161~240)
No Function
Slow ~ Fast
4
000 009
010 255
Motor Speed
No Function
Slow ~ Fast